Medium Bodied DWV Sewer PVC Solvent Cement Low VOC PVC Pipe Cement for Drain Waste Vent Systems

Drainage stacks are assembled fast, often overhead, and a cement that runs out of the joint before it grabs costs the crew a rework. This medium bodied white cement is tuned for DWV and sewer work: it grabs within seconds on horizontal runs, stays put on overhead stacks, and dissolves enough surface on both pipe and fitting to produce a continuous weld rather than a surface stick. It is the workhorse grade for sanitary drainage, storm water, vent stacks and septic field lines in residential and light commercial construction.

• Fast Initial Grab: Joint holds within 20 seconds so overhead DWV stacks can be assembled without clamping.
• Medium Body Flow: Brush loads cleanly on 1.5 inch through 8 inch fittings without drips.
• White Colour Match: Matches standard white DWV pipe and fittings for a uniform finished run.
• Deep Weld Penetration: Softens both surfaces to form a homogeneous joint rather than a glued seam.
• Low Odour Formula: Improves working conditions in confined risers and ceiling voids.
• Consistent Batch Viscosity: Every lot released only after a shear test against the master standard.

Solvent recovery and closed filling keep plant emissions low, and the white pigment contains no heavy metals. The 4 L workshop can reduces packaging waste on large drainage projects, and empty tins are accepted back in our closed loop container programme for customers in the region.

Sanitary drainage stacks, storm water laterals, vent piping, septic field collectors, grease trap connections and floor drain networks. It also performs well on swimming pool overflow lines and condensate drainage where a fast grab overhead is needed.

Standard export packing is 24 tins per carton for 500 ml and 12 per carton for 1 L, with 4 L cans shipped in two-unit sleeves. Cartons carry batch code, cure schedule and language options in English, Spanish or Arabic. A retained sample is kept from each batch for 24 months.

Yes, it is formulated for DWV and gravity sewer systems where pressure rating is not the governing requirement.

For pressurised systems choose our SCH40 SCH80 heavy bodied grade instead.

Allow 24 hours cure at 23 C before a hydrostatic or smoke test.

It matches white DWV pipe for a uniform appearance and easier visual inspection.

One pallet for trial, 1000 cartons for production with custom labels.

Ronggui or Leliu, both close to our Foshan plant.