NSF 61 Certified Low VOC PVC Solvent Cement ASTM D2564 for Potable Water Mains

This potable water grade solvent cement is formulated for drinking water transmission mains, treatment plant headers and municipal distribution networks where both joint integrity and water contact safety are audited. The resin system is blended under nitrogen blanketing so the batch keeps a stable viscosity from the first can to the last, and every lot is released only after a destructive joint test on the same pipe schedule the customer specifies. Certification documentation for NSF-ANSI 61 and ASTM D2564 is issued with each shipment, which lets contractors hand the paperwork straight to the utility inspector instead of chasing it afterwards.

• NSF-ANSI 61 Listed: Certified for contact with potable water, with declaration of conformity supplied per lot.
• ASTM D2564 Compliance: Tensile shear and hydrostatic burst data recorded against the ASTM D2564 acceptance envelope.
• Low VOC Formulation: Solvent load held below 450 g/L to satisfy regional air quality rules on public works sites.
• Stable Medium Body: Controlled flow lets the brush load evenly on 2 inch through 12 inch fittings without pooling.
• Wide Diameter Window: Qualified for joint diameters up to DN 200 mm on pressure rated PVC pipe.
• Traceable Batch Coding: Every can carries a batch and date code that links back to the retained sample in our lab.

The plant runs an ISO 14000 environmental management system and recovers solvent vapour from the mixing vessels rather than venting it. Cans are lined with an interior coating that resists attack from the cement so the container does not corrode in coastal storage, and cartons use recycled fibre with soy based ink. Workers on site get a product with a reduced solvent odour profile, which matters when joints are made inside valve chambers or treatment plant buildings.

Typical installations are municipal water mains, booster pump stations, fire water reservoirs, irrigation headworks and building service laterals that fall under drinking water regulation. The cement suits PVC pipe from SCH40 pressure classes through thin wall metric pipe, and it is commonly paired with our purple primer on lines that will be disinfected with chlorine after assembly. Where a utility specifies a maximum solvent emission limit for work inside a plant boundary, this grade is the one to quote.

Cans are packed 24 per carton and 48 cartons per pallet, with stretch wrap and edge protectors for sea freight. Each pallet carries a batch certificate, an SDS in the customer language and a declaration of conformity for NSF-ANSI 61 and ASTM D2564. We run a 100 percent leak check before cartoning, retain a sealed sample from every batch for 24 months, and replace any can that fails inspection on arrival.

Yes. The formula is listed to NSF-ANSI 61 and we issue a declaration of conformity with every shipment.

Joint strength and set behaviour are tested to ASTM D2564 on the pipe schedule named in your order.

It is suitable for buried mains once fully cured, and we recommend a protective wrap over joints in aggressive soil.

Yes, a low VOC purple primer in the same packaging family is available for a complete two step system.

One pallet for a trial, 1000 cartons for a full production run with custom labels.

Around 30 to 45 days after artwork approval, shipping from Ronggui or Leliu port.